Finally, there is a company that quotes those prepared–to–buy TODAY the TRUE WHOLESALE cost, charges modest fees, and GUARANTEES savings!
Hopefully, these questions and answers address all pertinent issues for you. If not, please feel free to call 1-888-512-1116.
A: Currently we are shipping structures within 9 weeks.
A: Currently we are shipping Reflective insulation in approximately 7-10 days and Fiberglass insulation within 2-3 weeks.
A: You can simply fill out a custom quote.
A: We offer Fiberglass and Reflective Insulation. R -Values range from R-10 to R-38.
A: Simply review our full array of accessories and prices on our accessory page.
A: A: If you are a ready buyer, please fill out a Building or Insulation quote form. These tabs are in the menu. You can also review posted Building and Insulation prices. These tabs are also in the menu.
If you receive a quote below our formal quoted price, simply email the proposal to firstname.lastname@example.org and we will honor our guaranteed saving terms.
A: Factory Steel Overstock, as well as most sellers, have the software to determine most minimum local code requirements – regarding snow/wind/seismic loads- based on your ZIP code. Please call your local building department to verify requirements. Choose snow load/wind speed codes that meet or exceed known requirements for your area. We recommend you make sure the required codes are listed on your contract/purchase order. This way you can be assured that your building will be designed to match the required codes. All our plans are engineered, certified, and stamped for the codes listed on the purchase order. Plans are completed within 21 days.
A: Most plans are delivered within 3 to 4 weeks. Please email us if you have not received your plans in this time frame.
A: Please click here to review Why Choose Us?
A: One should expect to pay whatever their state/local tax rate is. Because Factory Steel Overstock is reselling a building, it will abide by the terms of the manufacturer. The manufacturer will be abiding by the state requirements.
A: We quote up to a 26′ eave height. The building height is measured from the base of the sidewall wall to the eave.
A: 100′ x 500′ x 26′ is the maximum size for standard buildings. Projects larger are done on a case-by-case basis.
A: Entire United States. If you live outside the US, simply have us deliver to a port within the US. It will be your responsibility to barge the structure to its final location.
A: We currently ship from 8 strategically located fabrication plants nationwide for steel buildings and 7 locations for Insulations.
A: Yes! There are thirteen paint choices with a 40 year warranty Click – Colors
A: Factory Steel Overstock is now a resource for providing foundation engineering services for the following states: WA, OR, CA, ID, NV, AZ, WY, UT, and CO.
While the typical certified foundation design costs $2,500 to $3,000, Factory Steel Overstock provides the resource to you for only $1,300, $500 of which will be paid to FSO and $800 to the foundation engineer.
A typical foundation design consists of the following:
- Slab on grade construction
- Monolithic foundation with full slab, spread footings or drilled piers
- Single story building with spans up to 70’-0”
- Building site with non-expansive soils
- No pier only foundations
If your foundation design requires more than what has been stipulated below, the engineer will have to make a custom quote. Yes. Our customer will receive 2 sets of certified anchor bolt (permit) plans, 2 sets of erection plans as well as a certification letter.
A: It is standard practice for the customer to unload the building. Customers need to have an all-terrain forklift available at the job site.
A: 30% Building Deposit is paid within the 1st week of Order. Final Balances are paid 14 days before delivery or COD if pre-approved. Balances are paid with certified funds or wire transfer.
A: We currently are not involved with any erection services nor does Factory Steel Overstock recommend erection companies.
A: All our customers are given this information the same day we receive our profit. We allow our customers to send their building deposit directly to the AIS certified manufacturer, not to Factory Steel Overstock or any broker; thereby reflecting total transparency.
A: Once FSO receives your signed ORDER FORM and fees (profit amount), you will then receive the mailing address and wire information of the manufacturer. You then submit your deposit within a week of order.
A: Insulation is paid for in full before it is ordered.
A: Anchor bolts are NOT supplied by the building manufacturer, but by your foundation work contractor.
Anchor bolt settings for your template will be in the plans you receive approximately 3 weeks into your building order.
Factory Steel Overstock est. March 2011, has A+ Grade, has a 5 Star rating and all positive reviews posted at the BBB. Click BBB logo to read reviews.
Click Here to Read Testimonials from our Customer
“FSO and John have been wonderful to work with and his pricing has been excellent. All of the information is timely and he is very responsive. I will be purchasing all future buildings from FSO and I truly appreciate working with an excellent company.”
– Paul P 7/10/2017
Everything went as scheduled down to the minute. I got a price on my metal building that could not be matched by anyone. I even had a salesman call me a liar when I told him what my quote was. Also, when they say there is going to be a delivery at 8 in the morning on a certain day, you better be ready at 8 in the morning. No fuss, no muss. Perfect.
– THOMAS C – 11/20/2020
The building turned out great! Could not be happier with the quality! Me and my dad built it from the ground up just us. It’s finally done so time to load it full of projects! Thanks for the help and the quality building!
– Brandon Hillstead
– 40’x 60′ x 16′ 4/10/2020