Steel Building Accessories
Finally, there is a company that quotes those prepared–to–buy TODAY the TRUE WHOLESALE cost, charges modest fees, and GUARANTEES savings!
Accessory Resource Guide
Many companies offer limited accessory options or attempt to acquire a large percentage of their profit with accessories. With Factory Steel Overstock, you get the highest quality accessories at a wholesale cost. If you are a prepared buyer, simply fill out a Building Quote Form or Insulation Quote Form.
Commercial Walk Doors
Complete door kit with steel frame, header and jamb trim, threshold, and heavy-duty lockset. These doors are normally field located.
Estimated walk door price estimates range from is $390 to $850.
3’ x 7’ Non- insulated
3’ x 7’ Insulated
4’ x 7’ Non-insulated
4’ x 7’ Insulated
6’ x 7’ Non- insulated
6’ x 7’ Insulated
Walk door and window framed openings
Pre-designed framed openings are not required for walk doors or windows- unless in a high wind area. For high wind requirements, we prefer to offer Framed Openings in lieu of the manufacturer’s high wind-rated doors. This enables our clients the option of buying possibly lower-costing walk doors locally. Factory Steel Overstock will always present the most cost-effective options to the general public. If you want an engineered walk door framed opening designed into a steel building, just let us know.
Commercial Sliding Windows with Screen. Pre-designed framed openings are not required for windows- unless in a high wind area. Standard windows are field located and come in bronze or mill finish. If you want an engineered framed opening designed into a steel building, just let us know.
Estimated window price estimates range from is $175 to $450.
- 2′ x 7′ Non- insulated
- 2′ x 7′ Insulated
- 3′ x 3′ Non- insulated
- 3′ x 3′ Insulated
- 4′ x 3′ Non- insulated
- 4′ x 3′ Insulated
- 6′ x 3′ Non- insulated
- 6′ x 3′ Insulated
Our very sturdy translucent panels allow natural light into the building.
Estimated price range $125 to $250.
- 3′ x 10′ 8″‘ Non- insulated
- 3′ x 11′ Insulated
Ridge Vents, Louvers & Circular Vents
An accessory that allows air to pass through. The most popular vents are the Ridge Vents.
Estimated vent price estimates range from is $250 to $475.
- Ridge Vents – Sizes 10′ ridge ventilators with 9″ and 12″ throats. The Color finish is galvalume or white. Each comes with a bird screen and adjustable damper.
- Louvers – Sizes fixed 3’x3′, 3’x4′, and 4’x4′ or adjustable 3’x5 ‘and 4’x4’. Includes bird screen. Available finish in most Wall Colors.
- Circular Vents – Sizes 20″- Finish is galvalume or white. Includes bird screen.
This accessory is used to open portions of a wall. Factory Steel Overstock Fully Flashes Large Framed Openings is a standard feature.
Estimated price range is $250 to $500
Overhead/Roll Up Door Framed Openings & Additional Portal Frame Bracing if Required
If there is no space remaining for X bracing in an end wall or a sidewall bay, there will be an added cost for every wall fully utilized by your openings locations. CLICK to learn more about Portal Frame Vs X-Bracing (link).
Commercial Roll Up Doors
Available Series: 1900 Non – Insulated to 5250 Insulated and Wind Rated.
In general, your door needs to be a minimum of 2′ less than our building eave height, close to 4′ if the portal frame is required because you are placing the door in every bay of chosen sidewall or end wall Doors range from Light-Duty to Heavy-Duty and Wind-Rated.
Available Sizes: 8′ x 8′ to 18′ x 16′.
Estimated price range $500 to $2,700.
For Specifications of Door Series and color options, click Resource Guide
Gutters and Downspouts
Gutters and downs protect your building as well as enhance the building’s appearance.
NOTE: 30 to 40 lb. snow loads require gutters & downs that have Northern Ice Components. If your snow load is heavier than 40 lbs. codes, we don’t recommend adding gutters & downs.
Canopies & Purlin Extensions
Canopies- are on the sidewall. Purlin Extensions- are on the end wall. These are the most common items added to orders, simply because they enhance the appearance and performance of the building. The additional cost is minimal – with purlin extensions less costing than canopies. Our extensions are 1’ to 5’ and a soffit is a standard feature.
Our 29- or 26-gauge liner panels are standard 3’ wide that screw into the framing. They run either the entire building or to the eave height or to a 7’4” girt location. A connection point at the base is required when you order liner panels. Your liner panel will enhance your building’s appearance as well as protect the interior wall and any insulation.
Our Partition walls are made of 29 or 26 gauge sheeting that are non-load-bearing walls that separate the space within the building. Most order a FULL partition, meaning the building is completely separated ( up to the peak) by the partition wall.
Standing Seam Roof
This roof system has concealed fasteners and vertical legs that raise above the level of the panel’s flat area. Our Ultra – Dek is an attractive cost-effective means to upgrade your roof design.
Foundation Engineering Services
Factory Steel Overstock is now a resource for providing foundation engineering services for the following states: WA, OR, CA, ID, NV, AZ, WY, UT, CO, and NE.
While the typical certified foundation design costs $2,500 to $3,000, Factory Steel Overstock provides the resource to you for only $1,300, $500 of which will be paid to Factory Steel Overstock and $800 directly to the foundation engineer.
A typical foundation design consists of the following:
- Slab on grade construction
- Monolithic foundation with full slab, spread footings or drilled piers
- Single story building with spans up to 70’-0”
- Building site with non-expansive soils
- No pier only foundations
If your foundation design requires more than what has been stipulated below, the engineer will have to make a custom quote.