With the Factory Steel Overstock cost-plus program, you can purchase fiberglass and reflective insulation accessories at wholesale rates. You are promised savings below market prices of equal specifications. Our ONE-STOP-SHOPPING, allows you to purchasing insulation accessories such as tapes, banding, screws, etc at the same time of your insulation purchase. This saves time, reduces costs, and guarantees compatibility. These insulation accessories provide secure attachment, improved insulation performance, and longer lifespan, leading to better overall insulation effectiveness. For insulation deals, call 1-888-512-1116.
Fiberglass Insulation Accessories – Banding, Screws and Tapes
Banding
Fiberglass Insulation Accessories
Rough estimate is one roll of 500’ of banding per 1000 square foot area coverage. Roll of banding is $175/roll…so .175/sf?
Screws
/ plus 150 screws per roll of banding (typical) at .17/each.
How To Apply Banding
First wrap the banding around the insulated area, ensuring it is evenly spaced. Tighten securely without compressing the insulation, then fasten with clips or ties. Trim excess banding, ensuring a snug fit to maintain insulation integrity and effectiveness.
Double Sided Tape
Fiberglass Insulation Accessories
1/2″ x 60′ Rolls – $30.00
Reflective Insulation orders
$78.95
Double-sided adhesive tape, available in a package of 4 rolls, each being 1-1/2 inches wide and 60 yards long, is designed for securing insulation material to surfaces. This set is capable of effectively serving up to 2000 square feet of insulation area.
How To Apply Double-Sided Tape
First clean the surface, apply tape to the framing, peel off the backing, and press the insulation firmly against the tape. Ensure a tight bond by smoothing out any wrinkles or bubbles.
White Patch Tape
Fiberglass Insulation Accessories
3″ x 150′ WMP VRR tape – $30-$40.00 (based on location)
Reflective Insulation Orders
$78.95
White polypropylene facing/patch tape, provided in sets of 2 rolls, with a total measurement of 3 inches by 100 yards. This tape is specifically designed for sealing seams or patching any VR faced insulation, effectively covering an area of 1000 square feet of insulation.
How To Apply Patch Tape
First cut the tape to the required length. Press the tape firmly over any seams, tears, or gaps in the insulation. Smooth it out to ensure a tight seal and maximum adhesion, preventing air and moisture infiltration.
Reflective Insulation Accessories – Tape, Glue, and Pins
Reflective Tape
Reflective Insulation Accessories
Reflective tape plays a crucial role! Sealing seams with this tape enhances the efficiency of insulation. Each roll is 2.83″ x 60.1″. Available in packs containing 2, 8, and 16 rolls.
2 Rolls: $58.95 – 8 Rolls: $168.95 – 16 Rolls: $311.95
Pins and Caps
Reflective Insulation Accessories $358.95
1000 sets of 1-5/8″ pins accompanied by 1-1/2″ circular lock washers, amounting to 2000 pieces in total. Suggested placement involves one hanger per every 2 square feet. These I4L perforated base insulation hangers are specifically crafted for installations of our reflective insulation.
Super Metal Sealant
Reflective Insulation Accessories
94.95
Super Metal Adhesive: Sold in a pack of 12 tubes, this sealant efficiently bonds insulation materials to a wide range of surfaces.
Under Concrete Tape
Reflective Insulation Accessories
$49.95
Tape designed for under concrete or house wrap applications, provided in a package containing 2 rolls, with dimensions of 1.88 inches by 54.6 yards each, cumulating in 109 yards in total. This adhesive is specially formulated to enhance the effectiveness of reflective insulation under concrete and RBWP insulation, covering an insulation area of up to 1250 square feet.
Fiberglass protective clothing and equipment recommended:
- Coveralls: Full-body suits to protect skin from fibers and dust.
- Gloves: To prevent skin irritation and cuts.
- Safety glasses/goggles: To shield eyes from particles.
- Respirators/masks: To protect lungs from inhaling fibers.
- Hard hats: For head protection in construction environments.
- Boots: Sturdy footwear for foot protection and support.
NAIMA insulation certification ensures products meet industry standards for quality, safety, and performance.
ICC Evaluation approval for insulation ensures compliance with building codes, enhancing credibility, safety, and performance assurance.
While traditional outlets tend to inflate the prices of their insulation accessories to maintain their desired profit margins, Factory Steel Overstock takes a different approach. Like everything else, insulation accessories are sold at wholesale rates. With the brokerage fee covering the insulation cost, our customers can feel financially savvy when the buy insulation accessories with Factory Steel Overstock.