STANDARD 4:12 Steel Building Price Estimates

Finally, a company that posts wholesale building and accessory prices as well as lists the profit amounts without any upfront cost!

  1. Review estimated delivered wholesale cost (below)
  2. Add desired accessory cost (below) to complete your estimate.
  3. Then fill out a BUILDING QUOTE-ORDER FORM. A quote will be completed within 24 hours – that confirms savings.

You can get a TRUE wholesale quote without any upfront cost OR to pay a $100 refundable deposit before receiving a wholesale quote and reduce the profit-fee amount from $2,000 to $1,000. The full profit is paid after (same day) receiving the quote (no exceptions}. The average net savings is 10% below market quotes of equal specifications. The guaranteed minimum savings is $1,000 below market quotes of equal specifications! Questions 1-888-512-1116.

Examples

50x100x16 steel building special
Screen Shot 2023 04 05 at 2.37.58 PM
40x60x14 steel building special

80′ x 200′ x 16

“They were super helpful in designing the layout to our accommodations and our full order arrived on time. “ – Matthew Landrum 50′ x 100′ x 13′

40′ x 60’x 12′

Great Steel Building Testimonial for Factory Steel Overstock
Screen Shot 2023 04 14 at 1.24.52 PM
Steel buildings Order to Delivery

“FSO provides a quality product at a great price. They do so much volume they receive prices most people could never obtain on their own. Now three years later I am working with them to purchase a second building. “ Matt K 80′ x 100′ Galvanized Finish

40′ x 50′ x 10′

Wholesale Delivered Estimates

Building SizesSoutheastern DELIVERED Estimates
(Example Macon, GE)
4 lb Roof Load/110 Mph Wind
Northwest DELIVERED Estimates
(Example – Seattle, WA)
30 lb. Roof/115 mph
West DELIVERED Estimates
(Example – Aurora, CO)
30 lb. Roof/115 mph
Central DELIVERED Estimates
(Example -Columbus, OH)
25 lb. Roof/115 mph
30′ x 60′ 12′$20,712 – $21,802$27,338 – $29,518$25,600 to $ 27,780$22,138 – $ 24,318
40′ x 60′ x 14′$26,672 – $28,852$35,109 – $38,379$32,426 to $34,606$27,936 to $30,036
40′ x 80′ x 14′$34,696 – $34,696$43,032 – $45,212$41,428 to $43,608$35,348 to $37,548
50′ x 75′ x 16′$40,680 – $42,860$53,375 – $55,555$50,695 to $52,875$43,325 to $45,525
60′ x 100′ x 16′$58,287 – $60,467$75,589 – $77,769$73,835 to $76,015$63,548 to $65,728

Key Features Included in Standard 4:12 Model

  • 4:12 Roof Pitch
  • 40 Year Color Finish Warranty (Roof, Walls and Trim)
  • 1-Fully Flashed Framed Opening

Wholesale accessory prices

AccessoriesWalk DoorsWindowsSkylightsVentsFramed OpeningsRoll Up DoorsGutters & DownspoutsCanopies & Purlin ExtensionsWainscotLiner PanelsPartition WallsSeam Roof
Pricing$450-$750$150-$375$100-$200$275-$475$250-$450$500-$3,000Request on Quote FormRequest on Quote FormRequest on Quote FormRequest on Quote FormRequest on Quote FormRequest on Quote Form
Sizes3′ x 7′ to 6′ x 7′3′ x 3′ to 6′ x 3′3′ x 10′ Ridge, Louver, CircularAll available sizes8′ x 8′ to
18′ x 16′
Under 30 lb. loads1′ to 5′4′ w/ transition trim29 or 26 gauge29 or 26 gaugeUltra Deck 24 gauge
Scroll down for more information.

Standard Features included in the above prices.

  • Solid I – Beam Construction
  • Clear Span design (no interior columns)
  • 50 Year Structural Warranty
  • Fully Flashed Framed Openings
  • Complete Sculpted Trim Package
  • 40 Year Color Finish Warranty (Roof, Walls and Trim)
  • 1 1/4″ Sheeting profile, 26 Gauge Sheeting – 80,000 p.s.i. tensile strength
  • Purlin bearing rib (PBR profile) – has a larger overlap than R panels. Included for Roof & Walls.
  • Long-lasting roof and wall fasteners that match colored building choices.
  • All bolts, screws, closures, weather stripping, sealants, and fasteners as required to erect the structure 
  • The pre-punched connecting clips for the structural members, including endwall columns, are welded in place and primed during fabrication
  • All structural elements for the specified framed openings (jamb, girts, and headers) are pre-cut and pre-punched and the necessary clips are welded on during fabrication.
  • Anchor bolts and erection services by others. 
  • Manufacturer is IAS (International Accreditation Service) accredited as well as MBMA (Metal Building Manufacturer Association) membership.
  • Free (Initial) Certified Building Plans for ALL 50 states.
    • Letter of Certification
    • 2 sets of certified stamped erection plans
    • 2 sets of certified stamped anchor bolt plan
  • Foundation Engineering Services
  • Factory Steel Overstock provides a resource for foundation engineering services for the following states: WA, OR, CA, ID, NV, AZ, WY, UT and CO. While the typical certified foundation design costs $2,500 to $3,000, you only pay$1,300, $500 of which will be paid to FSO and $800 directly to the foundation engineer.

Wholesale Accessories Prices and Information

Most sellers offer limited accessory options and/or charge the full retail price for their accessories. With Factory Steel Overstock the general public buys the highest IAS-certified accessories at wholesale rates just like the main structure! Simply put, the more items purchased, the better the buying value since Factory Steel Overstock only charges $1,000 above the wholesale delivered price!

steel walk door

Commercial Walk Doors

Complete door kit with steel frame, header and jamb trim, threshold, and heavy-duty lockset. These doors are normally field located.

A Standard 3’x 7′ (Field located) Walk Door Price – $450 (additional sizes and styles available)


2070 Slimline Window

Commercial Windows

Commercial Sliding Windows with Screen.  Pre-designed framed openings are not required for windows- unless in a high wind area.  Standard windows are field located and come in bronze or mill finish. If you want an engineered framed opening designed into a steel building, just let us know.

A Standard 3’x’3′ (Field located) Window Price – $175 (additional sizes and styles available).

Our very sturdy translucent panels allow natural light into the building.


skylights for metal buildings

Skylights

A Standard 3’x’10’8″ Skylight Price – $125 (additional sizes and styles available)

  • 3′ x 10′ 8″‘ Non- insulated
  • 3′ x 11′ Insulated

vents 4

Ridge Vents, Louvers & Circular Vents

An accessory that allows air to pass through. The most popular vents are the Ridge Vents.

A 9″ x 10′ Ridge Vents Price – $475 (additional sizes and styles available).


Framed opening 5
Framed Opening WITHOUT Flashing (above), with Flashing (below). You can choose any color flashing you desire.
Flashing 5a

Framed Openings

This accessory is used to open portions of a wall. Factory Steel Overstock Fully Flashes Large Framed Openings is a standard feature.

A Framed Opening Price – $250 to $450 (based on size). Add $90 to fully flashed the opening.


Roll Up Doors 6
Framed Opening WITHOUT Flashing

Commercial Roll Up Doors

Available Series: 1900 Non – Insulated to 5250 Insulated and Wind Rated.

The public can buy Commerical Roll Up doors with chain hoists or Electric Operators with remotes – all at wholesale cost! Roll-up doors are available insulated or non-insulated as well as wind and non-wind rated. In general, your door needs to be a minimum of 2′ less than our building eave height, close to 4′ if the portal frame is required because you are placing the door in every bay of chosen sidewall or end wall.

Available Sizes: 8′ x 8′ to 18′ x 16′.

The estimated price range is $500 to $3,000

 


Gutters Downs 7
Picture Reflects Gutters and Downs

Gutters and Downspouts

Gutters and downs protect your building as well as enhance the building’s appearance.
NOTE: 30 to 40 lb. snow loads require gutters & downs that have Northern Ice Components. If your snow load is heavier than 40 lbs. codes, we don’t recommend adding gutters & downs.


Canopies Purlin Extensions 8

Canopies & Purlin Extensions

Canopies- are on the sidewall. Purlin Extensions- are on the end wall. These are the most common items added to orders, simply because they enhance the appearance and performance of the building. The additional cost is minimal – with purlin extensions less costing than canopies. Our extensions are 1’ to 5’ and a soffit is a standard feature.


Wainscot 9
Wainscot on Steel Building

Wainscot

4′ wainscot w/transition trim truly enhances your building’s look. The added girt also increases the integrity of the structure. Our Executive Model includes wainscot.

Click on Building Specials or Building DYI Estimators to see estimated delivered prices


Liner panels 10

Liner Panels

Our 29- or 26-gauge liner panels are standard 3’ wide that screw into the framing. They run either the entire building or to the eave height or to a 7’4” girt location. A connection point at the base is required when you order liner panels. Your liner panel will enhance your building’s appearance as well as protect the interior wall and any insulation.


Partition Wall 11

Partition Walls

Our Partition walls are made of 29 or 26 gauge sheeting that are non-load-bearing walls that separate the space within the building.  Most order a FULL partition, meaning the building is completely separated ( up to the peak) by the partition wall.


Standing Seam Roof 12

Standing Seam Roof

This roof system has concealed fasteners and vertical legs that raise above the level of the panel’s flat area. Our Ultra – Dek is an attractive cost-effective means to upgrade your roof design.


Foundation Engineering Services

Factory Steel Overstock is now a resource for providing foundation engineering services for the following states: WA, OR, CA, ID, NV, AZ, WY, UT, CO, and NE.

While the typical certified foundation design costs $2,500 to $3,000, Factory Steel Overstock provides the resource to you for only $1,300, $500 of which will be paid to Factory Steel Overstock and $800 directly to the foundation engineer.

A typical foundation design consists of the following:

  • Slab on grade construction
  • Monolithic foundation with full slab, spread footings or drilled piers
  • Single story building with spans up to 70’-0”
  • Building site with non-expansive soils
  • No pier only foundations

If your foundation design requires more than what has been stipulated below, the engineer will have to make a custom quote.


9 Key Reasons to Buy a Factory Steel Overstock Steel Building

1. Building Manufacturer is IAS Certified

What separates fabricators is the ability to prove that their fabrication methods meet or exceed a rigorous independent inspection. Getting IAS (International Accreditation Service) accredited involves evaluating the fabricators’ management and quality control systems as well as verifying that the on-site inspections have met the requirements of industry standards and IAS accreditation criteria. Factory Steel Overstock I-beam steel buildings come from an IAS Certified fabrication plant.

When a system is IAS-approved you can rest assured, adequate fabrication steps have been met! This benefits the customer tremendously in the field. No one wants to be burdened with unnecessary additional labor costs because columns have been miscut or hole placements are inaccurate. Maintaining the accreditation requires periodic assessments as required by the building code. 

2. Buildings Backed with a 50 Year Structural Warranty

The key feature of a rigid-frame steel building is the I-beam mainframes. The material used is 50,000 p.s.i. yield strength (Some manufacturers use only 34,000 p.s.i. yield strength material). 

Factory Steel Overstock frames are single-bead, continuous submerged arc welded by automatic welding machines to help ensure quality. Factory-applied rust-inhibiting primer is used to help protect the mainframes and secondary material during the erection process. Specifications

Beware of companies selling 2” tube steel or back-to-back C purlins as their mainframes, for these are far inferior designs.

Screen Shot 2023 01 27 at 2.23.22 PM

3. The Highest Quality Sheeting Materials

Factory Steel Overstock offers standard PBR panels for roofs and walls, which have a larger overlap than R panels.  Some firms utilize an R panel for their roof sheets (picture on right).  Most pole barns and tube buildings use a lighter 29-gauge sheeting thickness; however, Factory Steel Overstock utilizes a 24 or 26-gauge – 1 1/4″ profile, 80,000 p.s.i. tensile strength, PBR sheeting (Purlin bearing Rib).  For more information regarding building materials read Specifications.

fso8
FSO Standard
fso1
Industry Standard

4. Fully Flashed Framed Openings

One of the 1st things noticed when viewing a steel structure is the trim appearance, for it highlights the structure.  Factory Steel Overstock offers a fully flashed opening as a standard feature for all large openings. Industry standards only offer a simple trim at these locations – which shows the unfinished red iron. Why Buy from Us

fso7
FSO Standard
fso3
Industry Standard

5. 40-Year Paint Finish Warranty

Nothing enhances a building more or takes away from its appearance than the quality of the paint utilized. Industry standards are a 20 to 25-year color finish warranty. However, with Factory Steel Overstock there is peace of mind knowing the color warranty extends to 40 years. Remember, the industry-standard warranty is based on an allowable degree of fading before the 20 years have elapsed. Meaning, you will see some fading before the 20th year with industry standards! Color Chart

fso9
Factory Steel Overstock’s 40-year warranty after 20 years!
FSO5
Industry Standard 20-year warranty after 20 years!

6. Ordered Canopies & Purlin Extensions have SOFFITS

With Factory Steel Overstock, requested canopies and purlin extensions have soffits as a standard feature. 

Canopies- are on the sidewall. Purlin Extensions- are on the end wall. These are the most common items added to orders, simply because they enhance the appearance and performance of the building. The additional cost is minimal – with purlin extensions less costly than canopies. Our extensions are 1’ to 5’ and a soffit is a standard feature. 

FSO6
Factory Steel Overstock’s standard practice is to soffit (sheet) purlin extensions and canopies up to 5′.

7. Transparent Pricing Program, and Guaranteed Savings

Let’s keep it simple: It is about getting the highest quality materials and services at the lowest possible prices. Factory Steel Overstock is the only outlet that informs the general public of the actual wholesale cost, reveals the profit amount, and guarantees savings. For example:

Jack Smith from Nashville, Tennessee Is looking to build a garage that is 40′ x 60′ x 16′ in size. For his building accessories, he wants:

  • Two 14’x 14′ insulated roll up doors -$3,140 ($1,570 per item)
  • Six 3′ x 11′ insulated skylights- $600 ($100 per item)
  • One 3′ x 7′ insulated walk door-$361
  • R-Value 22 roof & wall insulation- $2,188
  • Two 9″ x 10′-0″ White Ridge Vents- $886 ($443 per item)

First, Jack found wholesale building costs for his specific state in our Pricing Glossary on the Building prices page (Found above). For Tennessee, Jack’s estimated delivered price for the base building is $26,408. To find the cost of the accessories he wants, Jack visited our Accessory Resource Guide, and our Insulation Prices page to locate the cost of his desired add-ons. Then, Jack added the cost of accessories to his base building price for an estimated subtotal of $33,583.

Screen Shot 2023 01 27 at 12.48.07 PM

The Simplest and Smartest Savings Program in the Industry

Factory Steel Overstock was founded in 2011 by a Spiritual Practitioner and a 35-year industry veteran. The program enables ready buyers to know the true wholesale costs and savings before paying the brokerage fee! Start by reviewing posted prices. Then on the day they are ready to buy, they fill out a Name Your Price or Wholesale Quote form. Questions 1-888-512-1116.

Factory Steel Overstock has an A+ Better Bureau grade and a 5-star rating. Read testimonials.

Our PROMISE

  1. If a lower price than Your Named Price is attained, you will be presented with that lower price. Factory Steel Overstock will not pocket the difference!
  2. For Wholesale Quotes, we will present you our EXACT wholesale cost! This price is guaranteed below market quotes of equal specifications – TERMS.

Your Promise

Upon receiving a price below market quotes, you PROMISE to pay the brokerage fee the SAME DAY of the received price.

Important: This no-upfront-cost savings program is designed for ready buyers. If you’re not prepared to pay the brokerage fee on the same day as receiving our quoted savings, please refrain from requesting a wholesale quote. Failure to pay the fee will result in a permanent ban from purchasing from Factory Steel Overstock’s Cost-Plus program. Questions 1-888-512-1116.

How to buy Metal Building Kits and Insulation at Wholesale Rates

Name Your Price

  • This option is exclusively for customers who know the exact market price for their steel building or insulation.
  • Can name their exact purchase price.
  • $350 Insulation brokerage fee for up to $25,000 of wholesale cost
  • $750 brokerage fee for up to $100,000 of wholesale cost on metal building kits.
Instructions
  1. Fill out the Name Your Price Form A representative will speak with you to verify your intent.
  2. If your desired purchase price is achieved, sign the proposal, return it, and pay the brokerage fee THAT DAY.
  3. Factory Steel Overstock will submit the order and service it through delivery and beyond.

Wholesale Custom Quotes

  • Select this option if you want assistance with choosing items for your project.
  • $350 – $500 brokerage fee for insulation orders.
  • $1,500 brokerage fee for steel building orders.
Instructions
  1. Fill Out an Insulation Quote-Order or Metal Building Kit Quote-Order Form.
  2. Call 1-888-512-1116. A representative will confirm your intentions to purchase and an assessment of your quote request.
  3. Receive a wholesale quote, that confirms savings. Sign the proposal and return it. Pay a $350 – $500 brokerage fee for Fiberglass Insulation orders or a $1,500 brokerage fee for Custom Building Orders. For reflective insulation orders, pay the wholesale cost + $350 brokerage fee to FSO.
  4. Factory Steel Overstock will submit the order and service it through delivery and beyond. For Building orders, pay a 30% building deposit to a certified manufacturer within 5 days. For Fiberglass orders, pay the wholesale fiberglass cost + taxes to the supplier within 3 days of the order.