Insulation Specials

True WHOLESALE cost and SPECIAL REDUCED FEES!

Buy Fiberglass or Reflective Insulation as low as 4% above TRUE wholesale cost!

TRUE WHOLESALE COST
INSULATION TYPESR-VALUES: 8 to 30TODAY’S “SPECIAL” Profit -Fee
$12,001 to $25,000ALL ALL$1,000

To see more delivered estimates, click ” blue” links below

Fiberglass R10 to R38 -click

Our standard facing is an attractive and stronger WMP -VR-R+ in lieu of the industry-standard VR-R. Available roll widths: 3′, 4′, 5′, and 6′. Length 30′ to 150′. To order SPECIAL, must fill out a Quote – Order Form. Then call 1-888-512-1116. After quoted savings, profit amount must be paid that same day.

Reflective R22 -click

This High R-Value insulation is VERY easy to install and durable! A very popular choice! Dimensions: 4’x 85.3′ (341 sq. ft). To order SPECIAL, must fill out a Quote – Order Form. Then call 1-888-512-1116. After quoted savings, profit amount must be paid that same day.

Reflective R17- click

This insulation has adhesive attached to each roll, making the installation a breeze! Dimensions: 4′ x 175′ (700 sq. ft.) To order SPECIAL, must fill out a Quote – Order Form. Then call 1-888-512-1116. After quoted savings, fee must be paid that same day.

White Reflective R15.3- click

If you prefer a white finished look, with the savings of Reflective insulation, this is a perfect choice! Dimensions: 4′ x 175′ (700 sq. ft.) To order SPECIAL, must fill out a Quote – Order Form. Then call 1-888-512-1116. After quoted savings, fee must be paid that same day.

Standard Features and Specifications

Steel building insulation is basically blankets of woven long-strand fiberglass that are laminated on one side to a vapor-barrier facing.  Facing materials are applied to fiberglass insulation blankets to serve as a vapor retarder as well as a protected cover over the fiberglass. This vinyl-reinforced backing is far more durable than vinyl alone.  

  • Factory Steel Overstock prices fiberglass insulation with a stronger WMP-VR-R + (PLUS) facing in lieu of the industry-standard VR-R. 
  • A 3″ tab runs along the length of both sides of rolled-out insulation for easier handling during install.
  • Double face tape and patch is a standard inclusion on insulation quoted by building measurements. Quotes of a specific square ft or number of rolls, patch and double face tapes are added upon request.
  • Customers can indicate the cut length and width of their rolls.
  • Standard insulation width: 3′, 4′, 5′, and 6′.

Fiberglass Insulation Contract proposals will indicate:

  • Type of insulation (example- WMP – VR-R +)
  • Number of rolls
  • Total square ft of insulation
  • Estimated Fiberglass Weight
  • Volume in cu ft
  • Thickness of insulation
  • Length of rolls
  • Delivered cost with applicable taxes

Approximate Thickness             R-Value

2.75″                                                     R – 8

3″                                                            R – 10

3.5″                                                        R – 11

4″                                                            R – 13

6″                                                            R – 19

8″                                                            R – 25

9.5″                                                         R – 30

  • ASTM C991-08, Standard Specification for Flexible
    Fibrous Glass Insulation for Metal Buildings; Type II.
  • NAIMA 202-96 (Rev. 2000) Standard for Flexible
    Fiberglass Insulation to be Laminated for Use in
    Metal Buildings.

For additional information, click Fiberglass Insulation Resource Guide

Our High R- Value Reflective insulation is the #1 choice for insulating pole barns and steel buildings!

R -Value 15.3 (WHITE facing) Reflective

  • 4′ x 175′ (700′ per roll).
  • 5 mm thickness
  • Improve tear resistance
  • Flame Spread – ZERO
  • White “attractive” facing
  • Layered: Reflective reinforced foil + Polyethlene foam + UV resistant “white” facing

R -Value 17 REFLECTIVE

  • 4′ x 175′ (700′ per roll)
  • Adhesive along one side of the 175′ roll. Its purpose is to easily seal the seams; therefore, no need to purchase tape to seal seam! This saves you up to 50% on installation time.
  • 5 mm thickness
  • Improve tear resistance
  • Flame Spread – ZERO
  • Layered: Reflective reinforced foil + Polyethlene foam + Reflective reinforced foil

High R- Value 22 REFLECTIVE

  • 4′ X 85.3′ (341′ per roll)
  • 10 mm thickness
  • Increased R- Value
  • Added longitudinal strength
  • Improved tear resistance
  • Flame Spread – ZERO
  • Layered: Reflective reinforced foil + Polyethlene foam + Reflective reinforced foil
  • Use a hot gun to melt the polyethlene foam at the edges overlapping. Add mild pressure. This will create “very” tight connection!

STANDARD FEATURES

  • R-Value unaffected by outside humidity
  • It prevents 97% of radiant transfer
  • Is a vapor barrier
  • Prevents condensation
  • 19 dba contact noise reduction
  • 90 Celsius (194 F) contact temperature rating
  • UV resistance
  • Material does not allow mold or mildew
  • Does not provide for nesting or rodents, bugs or birds
  • Easy seals around nails (no leaks)
  • 100% recyclable virgin raw materials 
  • It surface keeps it airflow

Recommended Purchase – Double Sided Tape

  • Comes in rolls of 4
  • Dimensions – 1 1/2″ x 60′
  • Serves 2000 sq. ft.

Attach insulation to surface. Which will help keep insulation from moving during installation. Also used to seal seams, which improves performance.

Our High R-Value Reflective Insulations (R –Value 15.3, 17, and 22) are not affected by humidity. Unquestionably our reflective insulations options are the best source to prevent moisture issues. Keep in mind, if there is humidity outside, there will be humidity inside your building. Your insulation is the first line of defense. IT MUST STOP CONDENSATION! Moisture is the #1 cause of the loss of R-value -which directly relates to ability of the insulation to effect temperature control.

Click Reflective Insulation Resource Guide for additional information

Fiberglass Batt insulation is delivered within approximately 3 to 4 weeks.

Reflective insulation is delivered within 7 ot 10 days.

Steps to ORDER INSULATION:

  • Fill out an ORDER -QUOTE FORM
  • A representative will briefly speak with you before completing a wholesale quote in order to answer questions and confirm your ” SAME DAY” buying intentions.
  • A formal INVOICE will be completed that day. Price is guaranteed below market quotes of equal specification standard.
  • Then customer pays for insulation that SAME DAY (no exceptions).

For additional information –Fiberglass Resource Guide or Reflective Resource Guide

TRANSPARANT PRICING PROGRAM
WHOLESALE COST +SPECIAL FEES
$0 – $3,000 $325
$3,001 – $4,000 $625
$4,001 – $8,000 $725
Larger insulation purchases, fees determined on a case-by-case basis. You must fill out a quote form.

Steps to ORDER INSULATION:

  • Fill out an ORDER -QUOTE FORM
  • A representative will briefly speak with you before completing a wholesale quote in order to answer questions and confirm your ” SAME DAY” buying intentions.
  • A formal INVOICE will be completed that day. Price is guaranteed below market quotes.
  • Then customer pays for insulation that SAME DAY (no exceptions).

Ninety percent of the public pays retail rates. Ten percent wisely don’t!

Factory Steel Overstock wholesale cost + low fee program was created for the 10% of the population that knows WHAT THEY WANT and are READY – TO- BUY TODAY – BASED ON RECEIVING A QUOTED SAVINGS! Educated – prepared buyers reduce a company’s operational cost; therefore, the savings should be passed down to them. Though Factory Steel Overstock would love its guaranteed savings program to align with everyone, it is acutely aware that 90% of the population are simply conditioned to retail buying behavior; therefore, a program of customer preparedness simply won’t work for them. You see, Factory Steel Overstock’s customers earn their savings by being ready-to-buy before requesting a formal quote.

Keep in mind, seventy – five percent of the certified metal buildings and insulation sold throughout the US initiate from just a few large corporations. These corporations distribute their products primarily through subsidiaries, brokers, retail outlets, and contractors. This means “even” if you can collect 50 quotes, you are still reviewing the same building or insulation materials, just sold by a different traditional distributor. In addition to this, these outlet’s profits are directly related to the mark – ups gained by commission sales representatives. With Factory Steel Overstock there are no commission sales representatives! The fees (profits) are predetermined upfront; therefore, it behooves Factory Steel Overstock to offer its insulation and metal buildings at the lowest possible wholesale rates. In a nutshell, the seller and buyer are working together towards the same goal!

You can continue the archaic practice of randomly contacting these sources or SMARTLY utilize Factory Steel Overstock’s expertise, special knowledge, and buying leverage. Factory Steel Overstock is the only steel building and insulation reseller that quotes the general public the “ACTUAL” wholesale cost, charges a low flat fee, and guarantees savings!

Please don’t rush into a purchase. Complete your research! The more educated you are, the better the WHOLESALE COST + fee program will look. The day you are truly prepared to buy, simply fill out an ORDER – QUOTE FORM. Your cooperation and integrity enable Factory Steel Overstock to offer this savings program.